DCVAMOUS 4PC 4×137 ATV UTV Wheel Spacers 1 Inch







DCVAMOUS 4PC 4×137 ATV UTV Wheel Spacers 1 Inch


DCVAMOUS 4PC 4×137 ATV UTV Wheel Spacers 1 Inch

Introduction

Enhance the performance of your ATV or UTV with the DCVAMOUS 4PC 4×137 ATV UTV Wheel Spacers 1 Inch. These wheel spacers are compatible with Kawasaki, Can-Am, and Honda vehicles, providing a 1-inch increase in width for improved stability and handling.

Main Features

  • 1-inch increase in width
  • Compatible with Kawasaki, Can-Am, and Honda vehicles
  • 4×137 bolt pattern
  • 10×1.25 studs
  • 110mm bore
  • Improved stability and handling

Installation

  1. Ensure that your ATV or UTV is securely parked on a level surface.
  2. Remove the existing wheels using a lug wrench.
  3. Clean the hub surface to ensure proper contact with the wheel spacers.
  4. Place the DCVAMOUS wheel spacers onto the hub, aligning the bolt holes.
  5. Insert the provided 10×1.25 studs into the wheel spacers.
  6. Tighten the lug nuts to the manufacturer’s recommended torque specification.
  7. Repeat the process for all four wheels.
  8. Double-check the tightness of the lug nuts after a short test drive.

Frequently Asked Questions

1. Are these wheel spacers compatible with all Kawasaki, Can-Am, and Honda models?

Yes, these wheel spacers are compatible with a wide range of Kawasaki, Can-Am, and Honda models. However, it is always recommended to check the specific bolt pattern and bore size of your vehicle before purchasing.

2. How do these wheel spacers improve stability and handling?

By increasing the width of your ATV or UTV, these wheel spacers provide a wider stance, resulting in improved stability and handling. This can be especially beneficial when navigating through rough terrains or taking sharp turns.

3. Can I install these wheel spacers myself?

Yes, these wheel spacers can be easily installed by following the provided installation instructions. However, if you are not familiar with the installation process, it is recommended to seek professional assistance.

4. Do I need any additional tools for installation?

No, the DCVAMOUS 4PC 4×137 ATV UTV Wheel Spacers 1 Inch come with all the necessary hardware for installation. However, you may need basic tools such as a lug wrench and torque wrench.

5. Are these wheel spacers durable?

Yes, these wheel spacers are made from high-quality materials to ensure durability and longevity. They are designed to withstand the rigors of off-road use and provide reliable performance.

Upgrade your ATV or UTV with the DCVAMOUS 4PC 4×137 ATV UTV Wheel Spacers 1 Inch and experience improved stability and handling. Compatible with Kawasaki, Can-Am, and Honda vehicles, these wheel spacers are easy to install and built to last. Don’t compromise on performance, get your DCVAMOUS wheel spacers today!